6, 7 Both approaches allow exposure of the proximal ascending thoracic aorta. The pericardium is opened and sutured to the skin edges to create a cradle in which to work and serve as retractors to keep lung and mediastinal tissues out of the working field. Two concentric pledgetted purse-string sutures of 3-0 polypropylene are placed at the intended insertion site. The center of these sutures is punctured

with a standard needle; similar to subclavian AMN-107 research buy access, a soft Inhibitors,research,lifescience,medical J-tip 0.035 wire is placed and a 6-Fr sheath placed over that. We then use an AL1 catheter and a soft straight-tip 0.035 wire to cross the aortic valve. The AL1 catheter is advanced into the left ventricle (LV) and a soft 0.035 J wire is placed. An angled 6-Fr pigtail catheter is then placed over this wire into the LV. A super-stiff Amplatz wire is then advanced over the pigtail catheter into the LV for support. The pigtail catheter is removed with the 6-Fr sheath, and the 18-Fr sheath is inserted. All currently available sheaths are intended for peripheral Inhibitors,research,lifescience,medical insertion and therefore Inhibitors,research,lifescience,medical have a long dilator segment and no “bumper” on the catheter to seat against

the aortic wall, as have most aortic cannulae for cardiopulmonary bypass (CPB). Figure 2. Direct Aortic, Upper J hemisternotomy. Figure 3. Direct aortic, right anterior minithoracotomy. To insert a Medtronic CoreValve, we need 55 mm for the length of the valve itself and a planned 10 mm for the sheath in the aorta as the depth of sheath insertion into the aorta. Prior to sheath placement we obtain an arteriogram with a graduated pigtail catheter in the non coronary cusp of the aortic valve and a marker at the site of planned sheath insertion to assure that Inhibitors,research,lifescience,medical at least 65 mm of space exist

from the planned depth of valve insertion to the sheath itself to allow for valve release. We currently modify a standard 18-Fr sheath by placing a silicone ring from an aortic cannula Inhibitors,research,lifescience,medical to mark the 1-cm mark, which controls insertion depth. Once inserted, one of the purse-string sutures is tightened with a tourniquet and tied to the cannula. Barasertib price The other is tightened with a tourniquet but not tied to the cannula to allow rapid tightening if the cannula is to dislodge in any way. With little cannula inside the aorta, we suture the cannula to the skin with a second suture for added security. Valve insertion tends to be relatively easy with this approach as the operator is close to the insertion site and has not had to come around the arch, so that much less tension builds within the catheter system. When finished, the purse strings are tied under direct vision similar to decannulation after CPB. Chest wall closure is in standard surgical fashion. The hemisternotomy approach has the advantage of not transgressing the pleura and usually gives a broader field of aorta to choose from for insertion.